Skip to content

Siemens PAC4200 Modbus Register Map

The Siemens PAC4200 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. Common in industrial automation and building management systems.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Siemens PAC4200
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Siemens PAC4200 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Voltage L1 N 400001 FLOAT32 V Voltage
Current L1 400013 FLOAT32 A Current
Apparent power L1 400019 FLOAT32 kW Power
Line Frequency 400055 FLOAT32 Hz Frequency
Sliding Window Demand Active Pow er L1 400325 FLOAT32 kW Demand
PMD Diagnostics and Status 400205 UINT16 - Status
Maximum 3 Phase Average Volt age L N 400131 FLOAT32 - General
Voltage L2 N 400003 FLOAT32 V Voltage
Voltage L3 N 400005 FLOAT32 V Voltage
Voltage L1 L2 400007 FLOAT32 V Voltage
Voltage L2 L3 400009 FLOAT32 V Voltage
Voltage L3 L1 400011 FLOAT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Siemens PAC4200 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Voltage
  • Current
  • Status
  • Demand
  • Frequency