Skip to content

Siemens PAC3200 Modbus Register Map

The Siemens PAC3200 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Siemens PAC3200 deployments, teams often use this map to surface power, voltage, and current data in industrial automation panels and building management systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Siemens PAC3200 Modbus map, Siemens PAC3200 register map, or Siemens PAC3200 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Siemens PAC3200
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Siemens PAC3200 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Siemens PAC3200 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Voltage Va n 400001 FLOAT32 V Voltage
Current a 400013 FLOAT32 - Current
Apparent Power a 400019 FLOAT32 kW Power
Energy pulse mode 450041 FLOAT32 kWh Energy
Frequency 400055 FLOAT32 Hz Frequency
Demand Period 400517 FLOAT32 kW Demand
Device Diagnostics and Device Status 400205 FLOAT32 - Status
Limit Violations 400203 FLOAT32 - General
IP address 463001 FLOAT32 - Communication
Bootloader version 463007 FLOAT32 - Identification
Voltage Vb n 400003 FLOAT32 V Voltage
Voltage Vc n 400005 FLOAT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Siemens PAC3200 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Voltage
  • Current
  • Status
  • Demand
  • Frequency