Skip to content

Siemens PAC2200 Modbus Register Map

The Siemens PAC2200 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Siemens PAC2200 deployments, teams often use this map to surface power, current, and voltage data in industrial automation panels and building management systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Siemens PAC2200 Modbus map, Siemens PAC2200 register map, or Siemens PAC2200 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Siemens PAC2200
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Siemens PAC2200 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Siemens PAC2200 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Voltage UL1 N 400002 FLOAT32 V Voltage
Current L1 400014 FLOAT32 A Current
Apparent power L1 400020 FLOAT32 kW Power
Secondary total of active energy im port 400962 DOUBLE64 kWh Energy
Frequency 400056 FLOAT32 Hz Frequency
Device diagnostics and device status 400206 UINT32 - Status
Active tariff 400212 UINT32 - General
Voltage UL2 N 400004 FLOAT32 V Voltage
Voltage UL3 N 400006 FLOAT32 V Voltage
Voltage UL1 L2 400008 FLOAT32 V Voltage
Voltage UL2 L3 400010 FLOAT32 V Voltage
Voltage UL3 L1 400012 FLOAT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Siemens PAC2200 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Current
  • Voltage
  • Energy
  • Status
  • Frequency