Skip to content

Schneider Electric Symmetra PX Modbus Register Map

The Schneider Electric Symmetra PX is a ups used for power continuity monitoring, alarm review, and resilience planning. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric Symmetra PX deployments, teams often use this map to surface power, current, and status data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Schneider Electric Symmetra PX Modbus map, Schneider Electric Symmetra PX register map, or Schneider Electric Symmetra PX Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Schneider Electric Symmetra PX
  • Type: UPS
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power continuity monitoring, alarm review, and resilience planning
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Schneider Electric Symmetra PX Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Schneider Electric Symmetra PX Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Battery Voltage 404359 UINT16 V Voltage
Battery Current 404361 UINT16 - Current
Battery Power 404369 UINT16 kW Power
Energy Meter kwH 405167 UINT16 kWh Energy
Frequency 404608 UINT16 Hz Frequency
UPS Status 400000 BIT - Status
BatterySystem Temperature 404367 INT16 degC Temperature
UPS Serial Number:6 404145 STRING - Identification
Time on battery 404352 UINT32 - General
Alarm Register 400002 INT16 - Status
Alarm Register 400003 INT16 - Status
Alarm Register 400004 INT16 - Status

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric Symmetra PX device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Current
  • Status
  • Voltage
  • Frequency
  • Temperature