Skip to content

Schneider Electric PM5000 / PM5100 / PM5300 Modbus Register Map

The Schneider Electric PM5000 / PM5100 / PM5300 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric PM5000 / PM5100 / PM5300 deployments, teams often use this map to surface voltage, current, and power data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Schneider Electric PM5000 / PM5100 / PM5300 Modbus map, Schneider Electric PM5000 / PM5100 / PM5300 register map, or Schneider Electric PM5000 / PM5100 / PM5300 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Schneider Electric PM5000 / PM5100 / PM5300
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Schneider Electric PM5000 / PM5100 / PM5300 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Schneider Electric PM5000 / PM5100 / PM5300 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Nominal voltage V 402017 FLOAT32 V Voltage
Nominal current A 402019 FLOAT32 - Current
Number of control power failures 401828 UINT16 kW Power
Conditional energy control status 401999 UINT16 kWh Energy
Nominal frequency Hz 402016 UINT16 Hz Frequency
Demand system assignment 403760 UINT16 kW Demand
Revenue security status 401920 UINT16 - Status
Meter name 400029 STRING - Identification
Manufacturer 400069 STRING - General
Duration of last control power failure seconds 401833 UINT32 kW Power
Nominal power factor 402021 UINT32 PF Power
Peak current demand over last year A 402047 FLOAT32 kW Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric PM5000 / PM5100 / PM5300 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Voltage
  • Current
  • Power
  • Energy
  • Demand
  • Frequency