Skip to content

Schneider Electric PM200 Modbus Register Map

The Schneider Electric PM200 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric PM200 deployments, teams often use this map to surface power, current, and voltage data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Schneider Electric PM200
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Schneider Electric PM200 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Scale Factor V voltage 404106 INT16 V Voltage
Scale Factor I current 404105 INT16 - Current
Scale Factor W power 404107 INT16 kW Power
Scale Factor E energy 404108 INT16 kWh Energy
Service Frequency 404125 INT16 Hz Frequency
Thermal Demand Interval 404117 INT16 kW Demand
Error Bitmap 404112 INT16 - General
Serial Number 407002 UINT16 - Identification
Modbus Address 407005 INT16 - Communication
Power Block Demand Interval 404118 INT16 kW Power
Power Block Demand Number of SubIntervals 404119 INT16 kW Power
Signed Real Energy Consumption 401000 FLOAT kWh Energy

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric PM200 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Current
  • Voltage
  • Energy
  • Frequency
  • Demand