Skip to content

Schneider Electric ION8800 Modbus Register Map

The Schneider Electric ION8800 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric ION8800 deployments, teams often use this map to surface power, power factor, and energy data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Schneider Electric ION8800
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Schneider Electric ION8800 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Uln 1 VoltsAmpsFreq 400010 UINT16 A Current
kW 1 PowerPF kW 400026 INT32 kW Power
kWh del EnergyTHD kWh 400090 INT32 kWh Energy
I 1 Ampfrequnbal 400149 UINT16 - Power Factor
Ull avg mx MinMaxDemand 400058 INT32 kW Demand
Uln 1 Volts 400165 UINT32 - General
PO U1-Flck N EN50160 Modbus 1 400999 UINT16 - Communication
Uln 2 VoltsAmpsFreq 400011 UINT16 A Current
Uln 3 VoltsAmpsFreq 400012 UINT16 A Current
Uln avg VoltsAmpsFreq 400013 UINT16 A Current
Ull 12 VoltsAmpsFreq 400014 UINT16 A Current
Ull 23 VoltsAmpsFreq 400015 UINT16 A Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric ION8800 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Power Factor
  • Energy
  • Current
  • Demand