Skip to content

Schneider Electric ION7400 Modbus Register Map

The Schneider Electric ION7400 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric ION7400 deployments, teams often use this map to surface current, voltage, and power data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Schneider Electric ION7400
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Schneider Electric ION7400 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Voltage A B V 403021 FLOAT32 V Voltage
Current A A 403001 FLOAT32 - Current
Active Power A W 403055 FLOAT32 kW Power
Active Energy Delivered Into Load kWh 402701 FLOAT32 kWh Energy
Frequency Hz 403111 FLOAT32 Hz Frequency
Digital Input Status Validity Base Unit 402401 UINT16 - Status
THD V1 10m Mean 440029 FLOAT32 - Harmonics
Meter Name :20 400031 STRING - Identification
Year year 401838 UINT16 - General
COM1 Baud Rate 454393 UINT16 - Communication
Digital Output Status Validity Base Unit 402403 UINT16 - Status
Setpoint Status Validity 402421 UINT16 - Status

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric ION7400 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Current
  • Voltage
  • Power
  • Energy
  • Harmonics
  • Frequency