Skip to content

Schneider Electric EM4800 Modbus Register Map

The Schneider Electric EM4800 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric EM4800 deployments, teams often use this map to surface power factor data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Schneider Electric EM4800 Modbus map, Schneider Electric EM4800 register map, or Schneider Electric EM4800 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Schneider Electric EM4800
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Schneider Electric EM4800 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Schneider Electric EM4800 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Meter 1 pf 400900 FLOAT - Power Factor
Meter 1 Wh delivered 400000 INT32 kWh General
Model 402600 INT16 - Identification
Meter 2 pf 400902 FLOAT - Power Factor
Meter 3 pf 400904 FLOAT - Power Factor
Meter 4 pf 400906 FLOAT - Power Factor
Meter 5 pf 400908 FLOAT - Power Factor
Meter 6 pf 400910 FLOAT - Power Factor
Meter 7 pf 400912 FLOAT - Power Factor
Meter 8 pf 400914 FLOAT - Power Factor
Meter 9 pf 400916 FLOAT - Power Factor
Meter 10 pf 400918 FLOAT - Power Factor

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric EM4800 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power Factor