Skip to content

Schneider Electric CM2000 Modbus Register Map

The Schneider Electric CM2000 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Schneider Electric CM2000 deployments, teams often use this map to surface power, current, and voltage data in data centers, switchgear lineups, and advanced power monitoring projects.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Schneider Electric CM2000 Modbus map, Schneider Electric CM2000 register map, or Schneider Electric CM2000 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Schneider Electric CM2000
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Schneider Electric CM2000 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Schneider Electric CM2000 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Voltage phase A to B Volts 401014 UINT16 V Voltage
Current phase A Amps 401003 UINT16 A Current
True power factor phase A 401031 UINT16 PF Power
Frequency Hertz 401001 UINT16 Hz Frequency
Time remaining in demand interval Seconds 401752 UINT16 kW Demand
Temperature inside CM enclosure Degrees C 401002 UINT16 degC Temperature
Harmonic factor phase A 401108 UINT16 - Harmonics
Update interval second 401000 UINT16 - General
Current phase B Amps 401004 UINT16 A Current
Current phase C Amps 401005 UINT16 A Current
Current neutral Amps 401006 UINT16 A Current
Current ground Amps 401007 UINT16 A Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Schneider Electric CM2000 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Current
  • Voltage
  • Harmonics
  • Frequency
  • Temperature