Skip to content

Eaton PXM4000 Modbus Register Map

The Eaton PXM4000 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Eaton PXM4000 deployments, teams often use this map to surface demand, power factor, and status data in critical power distribution and electrical monitoring systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton PXM4000 Modbus map, Eaton PXM4000 register map, or Eaton PXM4000 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton PXM4000
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton PXM4000 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton PXM4000 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
DemandAmpsAvg 414112 FLOAT32 A Current
ForwardEnergy 406305 FLOAT32 kWh Energy
PFdisplacementTotal 404657 FLOAT32 - Power Factor
DemandForwardWatts 414114 FLOAT32 kW Demand
SecondaryStatus 404609 UINT32 - Status
ErrCode 404610 UINT32 - General
Status 404609 UINT32 - Status
PFapparentTotal 404659 FLOAT32 - Power Factor
PFdisplacementA 404685 FLOAT32 - Power Factor
PFdisplacementB 404687 FLOAT32 - Power Factor
PFdisplacementC 404689 FLOAT32 - Power Factor
PFapparentA 404691 FLOAT32 - Power Factor

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton PXM4000 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Demand
  • Power Factor
  • Status
  • Energy
  • Current