Skip to content

Eaton 93PM Modbus Register Map

The Eaton 93PM is a ups used for power continuity monitoring, alarm review, and resilience planning. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. Common in critical backup power systems and UPS monitoring workflows.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton 93PM Modbus map, Eaton 93PM register map, or Eaton 93PM Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton 93PM
  • Type: UPS
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power continuity monitoring, alarm review, and resilience planning
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton 93PM Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton 93PM Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Nominal Input Voltage (L-L) iDeviceVoltsInRating 401358 UINT32 V Voltage
Output Current Rating iDeviceAmpsRating 401811 UINT16 A Current
Load Power Off sLoadPowerOff 417028 UINT16 kW Power
Output KW Hours mOutputKWHour 407003 FLOAT32 kWh Energy
Nominal Input Frequency iNominalInputFrequency 401670 UINT16 Hz Frequency
Output PF mPFdispOut 406203 FLOAT32 - Power Factor
Status sStatus 403001 UINT16 - Status
Ambient Temperature mTempAmbient 412001 FLOAT32 degC Temperature
Vendor Name VendorName:32 401033 STRING - Identification
Device Type iDeviceType:32 401129 STRING - General
Common Battery sCommonBattery 417017 UINT16 - Communication
Nominal Output Voltage (L-L) iDeviceVoltsOutRating 401360 UINT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton 93PM device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Current
  • Voltage
  • Status
  • Power Factor
  • Frequency
  • Energy