Skip to content

Eaton PXM3000 Modbus Register Map

The Eaton PXM3000 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Eaton PXM3000 deployments, teams often use this map to surface demand, energy, and harmonics data in critical power distribution and electrical monitoring systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton PXM3000 Modbus map, Eaton PXM3000 register map, or Eaton PXM3000 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton PXM3000
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton PXM3000 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton PXM3000 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
PercentVoltageUnbalance 401590 FLOAT32 V Voltage
PercentCurrentUnbalance 401592 FLOAT32 - Current
ForwardEnergy 401676 DOUBLE64 kWh Energy
PFapparentA 401522 FLOAT32 - Power Factor
DemandType 401036 UINT32 kW Demand
SysStatus 401076 UINT32 - Status
VanPerTHD 401816 FLOAT32 - Harmonics
Freq 401470 FLOAT32 - General
AlarmIndicator 401084 UINT32 - Status
PFapparentB 401524 FLOAT32 - Power Factor
PFapparentC 401526 FLOAT32 - Power Factor
PFapparentTotal 401528 FLOAT32 - Power Factor

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton PXM3000 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Demand
  • Energy
  • Harmonics
  • Status
  • Power Factor
  • Voltage