Skip to content

Eaton PXM1000 Series Modbus Register Map

The Eaton PXM1000 Series is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Eaton PXM1000 Series deployments, teams often use this map to surface power, energy, and harmonics data in critical power distribution and electrical monitoring systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton PXM1000 Series Modbus map, Eaton PXM1000 Series register map, or Eaton PXM1000 Series Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton PXM1000 Series
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton PXM1000 Series Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton PXM1000 Series Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Phase voltage V1 312291 FLOAT32 V Voltage
Current I1 312307 FLOAT32 - Current
Phase A power pa 312317 FLOAT32 kW Power
Energy IMP 316457 UINT32 kWh Energy
Frequency 312289 FLOAT32 Hz Frequency
PFapparentA 416489 FLOAT32 - Power Factor
DemandType 404111 UINT16 kW Demand
SysStatus 404143 UINT16 - Status
THDV1 of V1 V12 316474 UINT16 - Harmonics
Load characteristic LCR 316449 FLOAT32 - General
Phase voltage V2 312293 FLOAT32 V Voltage
Phase voltage V3 312295 FLOAT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton PXM1000 Series device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Energy
  • Harmonics
  • Voltage
  • Current
  • Demand