Skip to content

Eaton IQ100 series,IQ130,IQ140,IQ150 Modbus Register Map

The Eaton IQ100 series,IQ130,IQ140,IQ150 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Eaton IQ100 series,IQ130,IQ140,IQ150 deployments, teams often use this map to surface current, energy, and demand data in critical power distribution and electrical monitoring systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton IQ100 series,IQ130,IQ140,IQ150 Modbus map, Eaton IQ100 series,IQ130,IQ140,IQ150 register map, or Eaton IQ100 series,IQ130,IQ140,IQ150 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton IQ100 series,IQ130,IQ140,IQ150
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton IQ100 series,IQ130,IQ140,IQ150 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton IQ100 series,IQ130,IQ140,IQ150 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Amps A amps 401011 FLOAT32 A Current
Positive Power Factor 3 Ph Maximum Avg Demand none 403127 FLOAT32 PF Power
Power Energy Format pppp nn eee ddd 430005 UINT16 kWh Energy
Frequency Hz 401025 FLOAT32 Hz Frequency
Positive pf 3 ph average -100 to 100 402015 FLOAT32 - Power Factor
Positive Watts 3 Ph Maximum Avg Demand watts 403117 FLOAT32 kW Demand
Meter status bit-mapped 404999 UINT16 - Status
Meter Serial Number:8 400008 STRING - Identification
Meter type bit-mapped 400016 UINT16 - General
Amps B amps 401013 FLOAT32 A Current
Amps C amps 401015 FLOAT32 A Current
Neutral current amps 401027 FLOAT32 A Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton IQ100 series,IQ130,IQ140,IQ150 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Current
  • Energy
  • Demand
  • Frequency
  • Power
  • Power Factor