Skip to content

Eaton IQ100 Series / IQ130 / IQ140 / IQ150 Modbus Register Map

The Eaton IQ100 Series / IQ130 / IQ140 / IQ150 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Eaton IQ100 Series / IQ130 / IQ140 / IQ150 deployments, teams often use this map to surface current, energy, and demand data in critical power distribution and electrical monitoring systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Eaton IQ100 Series / IQ130 / IQ140 / IQ150 Modbus map, Eaton IQ100 Series / IQ130 / IQ140 / IQ150 register map, or Eaton IQ100 Series / IQ130 / IQ140 / IQ150 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Eaton IQ100 Series / IQ130 / IQ140 / IQ150
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Eaton IQ100 Series / IQ130 / IQ140 / IQ150 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Eaton IQ100 Series / IQ130 / IQ140 / IQ150 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Amps A amps 401011 FLOAT32 A Current
Positive Power Factor 3 Ph Maximum Avg Demand none 403127 FLOAT32 PF Power
Power Energy Format pppp nn eee ddd 430005 UINT16 kWh Energy
Frequency Hz 401025 FLOAT32 Hz Frequency
Positive pf 3 ph average -100 to 100 402015 FLOAT32 - Power Factor
Positive Watts 3 Ph Maximum Avg Demand watts 403117 FLOAT32 kW Demand
Meter status bit-mapped 404999 UINT16 - Status
Meter Serial Number:8 400008 STRING - Identification
Meter type bit-mapped 400016 UINT16 - General
Amps B amps 401013 FLOAT32 A Current
Amps C amps 401015 FLOAT32 A Current
Neutral current amps 401027 FLOAT32 A Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Eaton IQ100 Series / IQ130 / IQ140 / IQ150 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Current
  • Energy
  • Demand
  • Frequency
  • Power
  • Power Factor