Skip to content

SolarEdge SE3800H Modbus Register Map

The SolarEdge SE3800H is a solar inverter used for PV production monitoring, inverter diagnostics, and energy analytics. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For SolarEdge SE3800H deployments, teams often use this map to surface voltage, current, and power data in solar inverter monitoring and renewable energy systems.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for SolarEdge SE3800H Modbus map, SolarEdge SE3800H register map, or SolarEdge SE3800H Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: SolarEdge SE3800H
  • Type: Solar Inverter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: PV production monitoring, inverter diagnostics, and energy analytics
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full SolarEdge SE3800H Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the SolarEdge SE3800H Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
I AC VoltageAN1 440080 UINT16 V Voltage
I AC Current 440072 UINT16 - Current
I AC Power 440084 INT16 kW Power
I AC Energy WH 440094 UINT32 kWh Energy
I AC Frequency 440086 UINT16 Hz Frequency
M AC PF 440222 INT16 - Power Factor
I Status 440108 UINT16 - Status
I Temp Sink 440104 INT16 - Temperature
C SunSpec ID 440001 UINT32 - General
C Model:16 440021 STRING - Identification
M Exported 440227 UINT32 - Communication
I AC Current SF 440076 INT16 - Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the SolarEdge SE3800H device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Voltage
  • Current
  • Power
  • Energy
  • Frequency
  • Temperature