Skip to content

SolarEdge SE3000H Modbus Register Map

The SolarEdge SE3000H is a solar inverter used for PV production monitoring, inverter diagnostics, and energy analytics. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For SolarEdge SE3000H deployments, teams often use this map to surface voltage, current, and power data in solar inverter monitoring and renewable energy systems.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: SolarEdge SE3000H
  • Type: Solar Inverter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: PV production monitoring, inverter diagnostics, and energy analytics
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the SolarEdge SE3000H Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
I AC VoltageAN1 440080 UINT16 V Voltage
I AC Current 440072 UINT16 - Current
I AC Power 440084 INT16 kW Power
I AC Energy WH 440094 UINT32 kWh Energy
I AC Frequency 440086 UINT16 Hz Frequency
M AC PF 440222 INT16 - Power Factor
I Status 440108 UINT16 - Status
I Temp Sink 440104 INT16 - Temperature
C SunSpec ID 440001 UINT32 - General
C Model:16 440021 STRING - Identification
M Exported 440227 UINT32 - Communication
I AC Current SF 440076 INT16 - Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the SolarEdge SE3000H device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Voltage
  • Current
  • Power
  • Energy
  • Frequency
  • Temperature