Skip to content

Socomec DIRIS I31 Modbus Register Map

The Socomec DIRIS I31 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Socomec DIRIS I31 deployments, teams often use this map to surface energy, power, and voltage data in facility metering, commissioning, and operational analytics.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Socomec DIRIS I31 Modbus map, Socomec DIRIS I31 register map, or Socomec DIRIS I31 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF. Also aligns to search intent around Socomec DIRIS I31 Modbus register list, Socomec DIRIS I31 Modbus table.

Overview

  • Device: Socomec DIRIS I31
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Socomec DIRIS I31 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Socomec DIRIS I31 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Ph N Voltage V1 V 418444 UINT32 V Voltage
Current I1 mA 418458 UINT32 - Current
Total active power W 418476 INT32 kW Power
Total Positive active Energy EaP kWh 419841 UINT32 kWh Energy
Frequency mHz 418442 UINT32 Hz Frequency
Load status 418432 UINT16 - Status
SOCO :4 450000 STRING - General
MODBUS Table Version 450006 UINT16 - Identification
Ph N Voltage V2 V 418446 UINT32 V Voltage
Ph N Voltage V3 V 418448 UINT32 V Voltage
Ph Ph Voltage U12 V 418452 UINT32 V Voltage
Ph Ph Voltage U23 V 418454 UINT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Socomec DIRIS I31 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Energy
  • Power
  • Voltage
  • Status
  • Current
  • Frequency