Skip to content

Socomec Countis E63 Modbus Register Map

The Socomec Countis E63 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Socomec Countis E63 deployments, teams often use this map to surface power, energy, and voltage data in facility metering, commissioning, and operational analytics.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Socomec Countis E63 Modbus map, Socomec Countis E63 register map, or Socomec Countis E63 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF. Also aligns to search intent around Socomec Countis E63 Modbus register list, Socomec Countis E63 Modbus table.

Overview

  • Device: Socomec Countis E63
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Socomec Countis E63 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Socomec Countis E63 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Phase to phase voltage U12 450514 UINT32 V Voltage
Current transformer primary 457346 UINT16 - Current
Active power - P 450536 INT32 kW Power
Partial positive active energy ea 450780 UINT32 kWh Energy
Frequency F 450526 UINT32 Hz Frequency
SOCO :4 450000 STRING - General
Product software version EX 100 Version 1 00 450007 UINT16 - Identification
Communication board VLO 438919 STRING - Communication
Phase to phase voltage U23 450516 UINT32 V Voltage
Phase to phase voltage U31 450518 UINT32 V Voltage
Simple voltage V1 450520 UINT32 V Voltage
Simple voltage V2 450522 UINT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Socomec Countis E63 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Energy
  • Voltage
  • Current
  • Frequency