Socomec Countis E33, Countis E43 Modbus Register Map¶

The Socomec Countis E33, Countis E43 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Socomec Countis E33, Countis E43 deployments, teams often use this map to surface energy, power, and current data in facility metering, commissioning, and operational analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview¶

Device: Socomec Countis E33, Countis E43
Type: Power Meter
Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
Use case: power monitoring, energy metering, and facility automation
Works with: Modbus Monitor XPF (import directly)

Download Modbus Map¶

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Get Modbus Monitor XPF

Public JSON preview · Preview data terms

Register Table (Sample)¶

Sample registers from the Socomec Countis E33, Countis E43 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal	Address	Type	Units	Category
Phase to Phase Voltage U12 V	450514	UINT32	V	Voltage
Current Transformer secondary	457345	UINT16	-	Current
Active Power P P W	450536	INT32	kW	Power
Partial Positive Active Energy EaP Wh	450780	UINT32	kWh	Energy
Frequency F Hz	450526	UINT32	Hz	Frequency
MID status 0 non MID product 1 MID product	440545	UINT16	-	Status
SOCO :4	450000	STRING	-	General
JBUS Table Version EX 101 Version 1 01	450006	UINT16	-	Identification
Communication Board build date	438916	UINT16	-	Communication
Current Transformer primary A	457346	UINT16	-	Current
Phase to Phase Voltage U23 V	450516	UINT32	V	Voltage
Phase to Phase Voltage U31 V	450518	UINT32	V	Voltage

How to Use This Map¶

Download Modbus Monitor XPF — Get the free version.
Select the Socomec Countis E33, Countis E43 device map — check availability and access in the installed application catalog.
Connect to your device — confirm transport, addressing and data types before starting a read operation.
Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps¶

Saves time — no need to manually look up or enter register addresses
Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
Speeds commissioning — connect and poll within minutes instead of hours
Reusable across projects — use the same map across multiple sites and installations

Data Categories Available¶

Energy
Power
Current
Voltage
Power Factor
Status

Public catalog sample

The public JSON sample differs from the guide table above. Both are previews; confirm the exact model and firmware before use.

Signal	Display address	Data type	Units	Category
Phase to phase voltage U12	450514	UINT32	V	Voltage
Current transformer primary	457346	UINT16	-	Current
Active power - P	450536	INT32	kW	Power
Partial positive active energy ea	450780	UINT32	kWh	Energy
Frequency F	450526	UINT32	Hz	Frequency
Product name	450000	STRING	-	Identification
Product order ID Countis100 protection200 atys300 diris400	450004	UINT16	-	General
Communication board VLO	438919	STRING	-	Communication
Phase to phase voltage U23	450516	UINT32	V	Voltage
Phase to phase voltage U31	450518	UINT32	V	Voltage
Simple voltage V1	450520	UINT32	V	Voltage
Simple voltage V2	450522	UINT32	V	Voltage