Skip to content

Socomec Countis E23 Modbus Register Map

The Socomec Countis E23 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Socomec Countis E23 deployments, teams often use this map to surface energy, power, and voltage data in facility metering, commissioning, and operational analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Socomec Countis E23
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Socomec Countis E23 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Phase to Phase Voltage U12 V 450514 UINT32 V Voltage
Current I1 A 450528 UINT32 - Current
Sum Active Power P P W 450536 INT32 kW Power
Partial Positive Active Energy EaP Wh 450780 UINT32 kWh Energy
Frequency F Hz 450526 UINT32 Hz Frequency
MID status 0 non MID product 1 MID product 440545 UINT16 - Status
SOCO :4 450000 STRING - General
JBUS Table Version EX 101 Version 1 01 450006 UINT16 - Identification
Slave Address 457344 UINT16 - Communication
Phase to Phase Voltage U23 V 450516 UINT32 V Voltage
Phase to Phase Voltage U31 V 450518 UINT32 V Voltage
Simple voltage V1 V 450520 UINT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Socomec Countis E23 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Energy
  • Power
  • Voltage
  • Current
  • Frequency
  • Status
Public catalog sample

The public JSON sample differs from the guide table above. Both are previews; confirm the exact model and firmware before use.

SignalDisplay addressData typeUnitsCategory
Phase to phase voltage U12450514UINT32VVoltage
Current I1450528UINT32-Current
Active power - P450536INT32kWPower
Partial positive active energy ea450780UINT32kWhEnergy
Product name450000STRING-Identification
Product order ID Countis100 protection200 atys300 diris400450004UINT16-General
Phase to phase voltage U23450516UINT32VVoltage
Phase to phase voltage U31450518UINT32VVoltage
Simple voltage V1450520UINT32VVoltage
Simple voltage V2450522UINT32VVoltage
Simple voltage V3450524UINT32VVoltage
Current I2450530UINT32-Current