Skip to content

Electro Industries Shark 50 Modbus Register Map

The Electro Industries Shark 50 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Electro Industries Shark 50 deployments, teams often use this map to surface current, demand, and power data in facility metering, commissioning, and operational analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Electro Industries Shark 50
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Electro Industries Shark 50 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Amps A 401011 FLOAT32 A Current
Power Factor 3 Ph total 401023 FLOAT32 PF Power
Power Energy Format 430005 UINT16 kWh Energy
Frequency 401025 FLOAT32 Hz Frequency
Positive PF 3 Ph Average 402015 FLOAT32 - Power Factor
Positive Watts 3 Ph Minimum Avg Demand 403017 FLOAT32 kW Demand
Meter Status 404999 UINT16 - Status
Meter Name:8 400000 STRING - Identification
Meter Type 400016 UINT16 - General
Communication port setup 430025 UINT16 - Communication
Amps B 401013 FLOAT32 A Current
Amps C 401015 FLOAT32 A Current

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Electro Industries Shark 50 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Current
  • Demand
  • Power
  • Frequency
  • Energy
  • Power Factor