Skip to content

Electro Industries Shark 200 / 200T Modbus Register Map

The Electro Industries Shark 200 / 200T is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Electro Industries Shark 200 / 200T deployments, teams often use this map to surface energy, current, and demand data in facility metering, commissioning, and operational analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Electro Industries Shark 200 / 200T
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Electro Industries Shark 200 / 200T Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Phase A Voltage harmonic phases 0 1 degree 406045 INT16 V Voltage
Amps A amps 400284 UINT16 A Current
Power Factor 3 Ph total 400291 INT16 PF Power
W hours Received Wh per energy format 401499 INT32 kWh Energy
Frequency Hz 400292 UINT16 Hz Frequency
Positive PF 3 Ph Average 402015 FLOAT32 - Power Factor
Volts A N previous Demand interval Short Term Minimum volts 407975 FLOAT32 kW Demand
Meter Status mmmpch tffeeccc 404500 UINT16 - Status
Volts A N THD 0 01 405999 UINT16 - Harmonics
Meter Name :8 400000 STRING - Identification
Meter Type st vvv 400016 UINT16 - General
Port ID 404499 UINT16 - Communication

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Electro Industries Shark 200 / 200T device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Energy
  • Current
  • Demand
  • Power Factor
  • Power
  • Status