Skip to content

Electro Industries Shark 250 Modbus Register Map

The Electro Industries Shark 250 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Electro Industries Shark 250 deployments, teams often use this map to surface demand, power factor, and current data in facility metering, commissioning, and operational analytics.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Electro Industries Shark 250 Modbus map, Electro Industries Shark 250 register map, or Electro Industries Shark 250 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Electro Industries Shark 250
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Electro Industries Shark 250 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Electro Industries Shark 250 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Voltage Unbalance zero sequence component component 401062 UINT16 V Voltage
Current Unbalance 401064 UINT16 - Current
Pulse Output Test Power 410074 UINT16 kW Power
Save Energy to File 413993 UINT16 kWh Energy
Frequency 401025 FLOAT32 Hz Frequency
PF Total 401023 FLOAT32 - Power Factor
Demand Interval End Timestamp 401996 UINT16 kW Demand
Meter Status 404500 UINT16 - Status
Unit Lifetime Data MaxTemperature 404536 FLOAT32 degC Temperature
V A N THD Minimum 408077 UINT16 - Harmonics
Meter Name:8 400000 STRING - Identification
Meter Type 400016 UINT16 - General

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Electro Industries Shark 250 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Demand
  • Power Factor
  • Current
  • Harmonics
  • Status
  • Voltage