Skip to content

ABB Trio 50 / Trio 60 Modbus Register Map

The ABB Trio 50 / Trio 60 is a solar inverter used for PV production monitoring, inverter diagnostics, and energy analytics. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For ABB Trio 50 / Trio 60 deployments, teams often use this map to surface power, status, and current data in switchboards, facility power distribution, and commercial energy monitoring.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: ABB Trio 50 / Trio 60
  • Type: Solar Inverter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: PV production monitoring, inverter diagnostics, and energy analytics
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the ABB Trio 50 / Trio 60 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Inverter Grid Voltage V 400304 FLOAT32 V Voltage
Inverter Grid Current A 400308 FLOAT32 - Current
Dynamic Mode Power Factor Set Point Reactive Power expressed as fixed Power Factor 400201 FLOAT32 PF Power
Daily Energy Wh 401071 UINT32 kWh Energy
Mean Grid Frequency Hz 401107 FLOAT32 Hz Frequency
Global State 401051 UINT16 - Status
Internal Temperature C 401121 FLOAT32 degC Temperature
Remote On Off 400181 UINT16 - General
Accuracy Set unit for Modbus Data Addresses 0507 0508 0511 and 0512 or 400502 UINT16 - Communication
Set communication protocol for serial line RS485 1 401007 UINT16 - Identification
Permanent Mode Power Factor Set Point Reactive Power expressed as fixed Power Factor 400203 FLOAT32 PF Power
Dynamic Mode Active Power Set Point Active Power Curtailment expressed as percentage of Nominal Power in steps 400211 UINT16 kW Power

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the ABB Trio 50 / Trio 60 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Status
  • Current
  • Energy
  • Voltage
  • Temperature