Skip to content

ABB A41 / A42 Modbus Register Map

The ABB A41 / A42 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For ABB A41 / A42 deployments, teams often use this map to surface power, energy, and current data in switchboards, facility power distribution, and commercial energy monitoring.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for ABB A41 / A42 Modbus map, ABB A41 / A42 register map, or ABB A41 / A42 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: ABB A41 / A42
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full ABB A41 / A42 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the ABB A41 / A42 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Voltage L1 N V 423296 UINT32 V Voltage
Current L1 A 423308 UINT32 A Current
Apparent import kVAh kVAh 420504 UINT64 - Power
Active import kWh kWh 420480 UINT64 kWh Energy
Frequency Hz 423340 UINT16 Hz Frequency
Freeze demand 436720 UINT16 kW Demand
Input 1 Stored state 425360 UINT16 - Status
Active import Tariff 1 kWh 420848 UINT64 - General
Serial number 435072 UINT32 - Identification
Active export kWh kWh 420484 UINT64 kWh Energy
Active net kWh kWh 420488 INT64 kWh Energy
Reactive import kvarh kvarh 420492 UINT64 kWh Energy

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the ABB A41 / A42 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Energy
  • Current
  • Voltage
  • Status
  • Frequency