Skip to content

SEL SEL-735 Modbus Register Map

The SEL SEL-735 is a power quality and revenue meter used for power quality auditing, compliance reporting, and disturbance analysis. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For SEL SEL-735 deployments, teams often use this map to surface voltage, current, and demand data in utility metering, substations, and power quality analysis.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for SEL SEL-735 Modbus map, SEL SEL-735 register map, or SEL SEL-735 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: SEL SEL-735
  • Type: Power Quality and Revenue Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power quality auditing, compliance reporting, and disturbance analysis
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full SEL SEL-735 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the SEL SEL-735 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
VA RMS VOLTAGE VA 400358 INT32 V Voltage
IA RMS CURRENT IA 400350 INT32 - Current
PFD3 DISPLACEMENT POWER FACTOR 3 PHASE 400910 INT16 PF Power
FREQ FREQUENCY (HZ) 400900 UINT32 Hz Frequency
WP3_DEL WATT PEAK DEMAND 3 PHASE DELIVERED 400500 INT32 kW Demand
W3 WATTS 3 PHASE 400370 INT32 - General
IB RMS CURRENT IB 400352 INT32 - Current
IC RMS CURRENT IC 400354 INT32 - Current
IN RMS CURRENT IN 400356 INT32 - Current
VB RMS VOLTAGE VB 400362 INT32 V Voltage
VC RMS VOLTAGE VC 400360 INT32 V Voltage
VAB RMS VOLTAGE VAB 400364 INT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the SEL SEL-735 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Voltage
  • Current
  • Demand
  • Frequency
  • Power