Skip to content

Janitza UMG104 Modbus Register Map

The Janitza UMG104 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Janitza UMG104 deployments, teams often use this map to surface harmonics, energy, and voltage data in facility metering, commissioning, and operational analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Janitza UMG104
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Janitza UMG104 Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Voltage L1 N V 419000 FLOAT32 V Voltage
Apparent current L1 A 419012 FLOAT32 A Current
Real power L1 W 419020 FLOAT32 kW Power
Real energy L1 Wh 419054 FLOAT32 kWh Energy
Measured frequency Hz 419050 FLOAT32 Hz Frequency
Status digital output 0not active 1active n 409973 INT16 - Status
Internal temperature DC 401461 FLOAT32 degC Temperature
Harmonic thd u L1 N 419110 FLOAT32 - Harmonics
Vector sum ini1i2i3 A 419018 FLOAT32 - General
Rs485 modbus address 410180 INT32 - Communication
Serial number 410176 UINT32 - Identification
Voltage L2 N V 419002 FLOAT32 V Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Janitza UMG104 device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Harmonics
  • Energy
  • Voltage
  • Current
  • Power
  • Frequency