Skip to content

GE EPM 7000 / EPM 7100 Modbus Register Map

The GE EPM 7000 / EPM 7100 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For GE EPM 7000 / EPM 7100 deployments, teams often use this map to surface demand, current, and power factor data in facility metering, commissioning, and operational analytics.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for GE EPM 7000 / EPM 7100 Modbus map, GE EPM 7000 / EPM 7100 register map, or GE EPM 7000 / EPM 7100 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: GE EPM 7000 / EPM 7100
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full GE EPM 7000 / EPM 7100 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the GE EPM 7000 / EPM 7100 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
Phase A Voltage harmonic magnitudes 406005 UINT16 V Voltage
Amps A 400284 UINT16 A Current
Power Factor 3 Ph total 400291 INT16 PF Power
Power Energy Format 430005 UINT16 kWh Energy
Frequency 400292 UINT16 Hz Frequency
Positive PF 3 Ph Average 402015 FLOAT32 - Power Factor
Volts A N previous Demand interval Short Term Minimum 407975 FLOAT32 kW Demand
Meter Status 404500 UINT16 - Status
Unit Lifetime Data Max Temperature 404536 FLOAT32 degC Temperature
Volts A N THD 405999 UINT16 - Harmonics
Meter Name:8 400000 STRING - Identification
Meter Type 400016 UINT16 - General

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the GE EPM 7000 / EPM 7100 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Demand
  • Current
  • Power Factor
  • Harmonics
  • Status
  • Voltage