Skip to content

Carlo Gavazzi EM24 Modbus Register Map

The Carlo Gavazzi EM24 is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Carlo Gavazzi EM24 deployments, teams often use this map to surface energy, voltage, and power factor data in panel metering, building automation, and energy submetering.

This page shows a preview subset of the full device map available in Modbus Monitor XPF.

Engineers searching for Carlo Gavazzi EM24 Modbus map, Carlo Gavazzi EM24 register map, or Carlo Gavazzi EM24 Modbus registers can use this page as a compatibility snapshot before importing the full map into Modbus Monitor XPF.

Overview

  • Device: Carlo Gavazzi EM24
  • Type: Power Meter
  • Protocol: Modbus RTU / Modbus TCP
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The full Carlo Gavazzi EM24 Modbus register map is available inside Modbus Monitor XPF as a pre-built device map. Download the free feature-locked version to access and export the complete map.

Register Table (Sample)

Sample registers from the Carlo Gavazzi EM24 Modbus map. Import the full map in Modbus Monitor XPF to access all registers.

Signal Address Type Units Category
V L1 N 300001 INT32 - Voltage
KWh TOT 300063 INT32 kWh Energy
Hz 300056 INT16 - Frequency
PF L1 300051 INT16 - Power Factor
Digital input status 300769 UINT16 - Status
A L1 300013 INT32 - General
Version code 300771 UINT16 - Identification
V L2 N 300003 INT32 - Voltage
V L3 N 300005 INT32 - Voltage
V L1 L2 300007 INT32 - Voltage
V L2 L3 300009 INT32 - Voltage
V L3 L1 300011 INT32 - Voltage

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Carlo Gavazzi EM24 device map — pre-built maps are bundled and ready to load.
  3. Connect to your device — enter the device IP or COM port and start polling registers immediately.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — pre-validated maps eliminate mis-typed addresses and wrong data types
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Energy
  • Voltage
  • Power Factor
  • Status
  • Frequency