Skip to content

Accuenergy Acuvim II Modbus Register Map

The Accuenergy Acuvim II is a power meter used for power monitoring, energy metering, and facility automation. This page provides a sample Modbus register map with addresses, data types, and signal categories to help engineers commission, troubleshoot, and monitor the device. For Accuenergy Acuvim II deployments, teams often use this map to surface power, energy, and current data in multi-circuit energy monitoring, tenant billing, and branch circuit analytics.

This page shows a public register preview. Check the catalog in your installed XPF version for complete-map availability and licensing.

Confirm the exact model and firmware, address base, register function, word order, scaling and units against the manufacturer manual before polling. This preview does not establish hardware validation.

Overview

  • Device: Accuenergy Acuvim II
  • Type: Power Meter
  • Protocol: Confirm the supported transport for the exact device and firmware in the manufacturer manual.
  • Use case: power monitoring, energy metering, and facility automation
  • Works with: Modbus Monitor XPF (import directly)

Download Modbus Map

The sample below is a public preview. Check the catalog in your installed XPF version for current availability, access and licensing.

Public JSON preview · Preview data terms

Register Table (Sample)

Sample registers from the Accuenergy Acuvim II Modbus map. Confirm the sample against the exact device and firmware before use.

Signal Address Type Units Category
Voltage Input Wiring Type 0 3LN 1 1LN 2 2LL 3 3LL 4 1LL 404100 UINT16 V Voltage
Current Input Wiring Type 0 3CT 1 1CT 2 2CT 404101 UINT16 - Current
Reactive Power Calculation Method 0 True Reactive Power 1 Generic Reactive Power 404121 UINT16 kW Power
kWh Pulse Constant 1 60000 404107 UINT16 kWh Energy
Frequency Selection 0 50Hz 1 60Hz 404094 UINT16 Hz Frequency
VAR PF Convention 0 IEC 1 IEEE 404118 UINT16 - Power Factor
Demand Interval 1 30 404110 UINT16 kW Demand
Seal Status 0x0A Sealed Other Unsealed 404128 UINT16 - Status
THD V1 V12 THD Rx 100 416475 INT16 - Harmonics
Channel 1 Communication Protocol 0 Modbus 2 BACnet MS TP 404095 UINT16 - Communication
Channel 1 Parity 0 Even 1 Odd 2 None2 3 None1 404096 UINT16 - General
kvarh Pulse Constant 1 60000 404108 UINT16 kWh Energy

How to Use This Map

  1. Download Modbus Monitor XPF — Get the free version.
  2. Select the Accuenergy Acuvim II device map — check availability and access in the installed application catalog.
  3. Connect to your device — confirm transport, addressing and data types before starting a read operation.
  4. Visualise and log — build dashboards, trend data, and export readings without manual register entry.

Why Use Pre-Built Maps

  • Saves time — no need to manually look up or enter register addresses
  • Reduces errors — reusable maps reduce repeated manual entry; validate addresses and data types for your device
  • Speeds commissioning — connect and poll within minutes instead of hours
  • Reusable across projects — use the same map across multiple sites and installations

Data Categories Available

  • Power
  • Energy
  • Current
  • Voltage
  • Harmonics
  • Status