Skip to content

Sungrow Inverter SG Modbus register preview

Public preview for Sungrow Inverter SG (Solar Inverter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: sungrow-inverter/sg
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
DC voltage1 V 305011 UINT16 V Voltage
DC current1 A 305012 UINT16 - Current
Total power yields kW 305004 UINT32 kW Power
Grid frequency Hz 305036 UINT16 Hz Frequency
Work state 305038 UINT16 - Status
Internal temperature 305008 INT16 degC Temperature
Total running time 305006 UINT32 - General
DC voltage 2 V 305013 UINT16 V Voltage
DC current 2 A 305014 UINT16 - Current
DC voltage 3 V 305015 UINT16 V Voltage
DC current 3 A 305016 UINT16 - Current
Total DC power W 305017 UINT32 kW Power

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews