SolarX Power Hybrid X1,Hybrid X3,X1AC Modbus register preview¶
Public preview for SolarX Power Hybrid X1,Hybrid X3,X1AC (Solar Inverter). This sample is not a complete map or evidence of hardware testing.
Preview details¶
- Catalog ID:
solarx-power/hybrid-x1-hybrid-x3-x1ac - Map version: 1.0
- Verification: not-reviewed
- Protocols: RTU, TCP
- Public preview: 12 registers. Complete in-app availability is not established by this preview.
Register table (sample)¶
| Signal | Display address | Data type | Units | Category |
|---|---|---|---|---|
| Pv voltage1 Hybrid V | 300003 | UINT16 | V | Voltage |
| Grid current X1 V | 300001 | INT16 | - | Current |
| Grid power X1 W | 300002 | INT16 | kW | Power |
| Output energy ChargeLSB KWh | 300029 | UINT16 | kWh | Energy |
| Grid frequency X1 Hz | 300007 | UINT16 | Hz | Frequency |
| BMS connect state | 300023 | UINT16 | - | Status |
| Temperature | 300008 | INT16 | degC | Temperature |
| Run mode | 300009 | UINT16 | - | General |
| Pv voltage2 Hybrid V | 300004 | UINT16 | V | Voltage |
| Pv current1 Hybrid A | 300005 | UINT16 | - | Current |
| Pv current2 Hybrid A | 300006 | UINT16 | - | Current |
| Powerdc1 Hybrid W | 300010 | UINT16 | kW | Power |
Addressing and setup¶
Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.
Use with Modbus Monitor XPF¶
Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.
Get Modbus Monitor XPF · Request a map or correction · Browse all previews