SmartProcess SMARTRAIL X835 Modbus register preview¶
Public preview for SmartProcess SMARTRAIL X835 (Power Meter). This sample is not a complete map or evidence of hardware testing.
Preview details¶
- Catalog ID:
smartprocess/smartrail-x835 - Map version: 1.0
- Verification: not-reviewed
- Protocols: RTU, TCP
- Public preview: 12 registers. Complete in-app availability is not established by this preview.
Register table (sample)¶
| Signal | Display address | Data type | Units | Category |
|---|---|---|---|---|
| System current 00 | 400008 | UINT32 | - | Current |
| System power 00 | 400036 | UINT32 | kW | Power |
| Energy units prefix 00 | 400030 | UINT32 | kWh | Energy |
| Demand time 00 | 400000 | UINT32 | kW | Demand |
| System volts 00 | 400006 | UINT32 | - | General |
| Network baud rate 00 | 400028 | UINT32 | - | Communication |
| Serial number hi 00 | 400042 | UINT32 | - | Identification |
| Demand period 00 | 400002 | UINT32 | kW | Demand |
| Relayl energy type 00 | 400086 | UINT32 | kWh | Energy |
| Relay2 energy type 00 | 400088 | UINT32 | kWh | Energy |
| System type 00 | 400010 | UINT32 | - | General |
| Relay pulse width 00 | 400012 | UINT32 | - | General |
Addressing and setup¶
Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.
Use with Modbus Monitor XPF¶
Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.
Get Modbus Monitor XPF · Request a map or correction · Browse all previews