Selec EM2M-1P Modbus register preview¶
Public preview for Selec EM2M-1P (Power Meter). This sample is not a complete map or evidence of hardware testing.
Preview details¶
- Catalog ID:
selec/em2m-1p - Map version: 1.0
- Verification: not-reviewed
- Protocols: RTU, TCP
- Public preview: 12 registers. Complete in-app availability is not established by this preview.
Register table (sample)¶
| Signal | Display address | Data type | Units | Category |
|---|---|---|---|---|
| Voltage L-N | 300020 | FLOAT32 | V | Voltage |
| Current | 300022 | FLOAT32 | - | Current |
| Active power | 300014 | FLOAT32 | kW | Power |
| Total active energy | 300000 | FLOAT32 | kWh | Energy |
| Frequency | 300026 | FLOAT32 | Hz | Frequency |
| Import active energy | 300002 | FLOAT32 | kWh | Energy |
| Export active energy | 300004 | FLOAT32 | kWh | Energy |
| Total reactive energy | 300006 | FLOAT32 | kWh | Energy |
| Import reactive energy | 300008 | FLOAT32 | kWh | Energy |
| Export reactive energy | 300010 | FLOAT32 | kWh | Energy |
| Apparent energy | 300012 | FLOAT32 | kWh | Energy |
| Reactive power | 300016 | FLOAT32 | kW | Power |
Addressing and setup¶
Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.
Use with Modbus Monitor XPF¶
Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.
Get Modbus Monitor XPF · Request a map or correction · Browse all previews