Skip to content

Schrack NA96 Modbus register preview

Public preview for Schrack NA96 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: schrack/na96
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Phase 1 phase voltage mV 400769 INT32 V Voltage
Phase 1 current mA 400781 INT32 - Current
3phase active power 400793 INT32 kW Power
3phase positive reactive energy 400835 INT32 kWh Energy
Frequency Hz 400825 UINT16 Hz Frequency
3phase peak maximum demand 400852 INT32 kW Demand
Output relay status 400833 UINT16 - Status
Phase 1 thd vl 400912 UINT16 - Harmonics
3phase positive active enerqy 400805 INT32 - General
Phase 2 phase voltage mV 400773 INT32 V Voltage
Phase 3 phase voltage mV 400777 INT32 V Voltage
Phase 2 current mA 400785 INT32 - Current

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews