Skip to content

NZIF SET-4TM Modbus register preview

Public preview for NZIF SET-4TM (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: nzif/set-4tm
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Device 1 Voltage A 404361 UINT16 V Voltage
Device 1 Active power A 404364 UINT32 kW Power
Device 1 Total active energy 404371 UINT32 kWh Energy
Device 1 Connection state 404352 UINT16 - Status
Device 1 Temperature 404370 UINT16 degC Temperature
Device 1 Address 404353 UINT16 - Communication
Device 1 Timestamp 404357 INT16 - General
Device 1 Voltage B 404362 UINT16 V Voltage
Device 1 Voltage C 404363 UINT16 V Voltage
Device 1 Active power B 404366 UINT32 kW Power
Device 1 Active power C 404368 UINT32 kW Power
Device 1 Total reactive energy 404373 UINT32 kWh Energy

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews