Skip to content

Honeywell EEM230 Modbus register preview

Public preview for Honeywell EEM230 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: honeywell/eem230
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Urms effective voltage 400035 UINT16 V Voltage
Irms effective current 400036 UINT16 - Current
Prms effective active power 400037 UINT16 kW Power
WT1 total counter energy total tariff 1 400027 UINT32 kWh Energy
Status protect 400021 UINT16 - Status
Number of supported registers 400001 UINT16 - Communication
Hw vers Modif 400014 UINT16 - General
Serial number low 400015 UINT32 - Identification
WT1 partial counter energy partial tariff 1 400029 UINT32 kWh Energy
Qrms effective reactive power 400038 UINT16 kW Power
Number of supported flags 400002 UINT16 - Communication
Baud rate 400003 UINT32 - Communication

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews