Skip to content

Farnell iEM3100, iEM3200 Modbus register preview

Public preview for Farnell iEM3100, iEM3200 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: farnell/iem3100-iem3200
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Current Avg Voltage A 403010 FLOAT32 V Voltage
I1 phase 1 current A 403000 FLOAT32 - Current
Power System 402016 UINT16 kW Power
Energy Pulse Duration Millisecond 402129 UINT16 kWh Energy
Nominal Frequency Hz 402017 UINT16 Hz Frequency
Digital Output Control Mode Status 409673 UINT16 - Status
Serial Number 400130 UINT32 - Identification
Meter Operation Timer Secon 402004 UINT32 - General
Address 406501 UINT16 - Communication
Pulse Weight pulsekWh 402132 FLOAT32 kWh Energy
I2 phase 2 current A 403002 FLOAT32 - Current
I3 phase 3 current A 403004 FLOAT32 - Current

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews