Skip to content

Epever B Serie s Modbus register preview

Public preview for Epever B Serie s (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: epever/b-serie-s
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Array rated voltage V 312288 UINT16 V Voltage
Array rated current A 312289 UINT16 - Current
Array rated power W 312290 UINT32 kW Power
Consumed energy today 313060 UINT32 kWh Energy
Battery status 312800 UINT16 - Status
Battery temperature C 312560 UINT16 degC Temperature
Charging mode 312296 UINT16 - General
Battery rated voltage V 312292 UINT16 V Voltage
Battery rated current A 312293 UINT16 - Current
Battery rated power W 312294 UINT32 kW Power
Rated current of load W 312302 UINT16 - Current
Pv array input voltage V 312544 UINT16 V Voltage

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews