Skip to content

Enerdis Enerium 100-200 Modbus register preview

Public preview for Enerdis Enerium 100-200 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: enerdis/enerium-100-200
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Unbalance of the voltages 401348 INT16 V Voltage
Hour meter presence of current 402564 UINT32 - Current
Active energy receiver mode Wh 402566 UINT32 kWh Energy
Frequency Hz 401349 UINT16 Hz Frequency
PF1 401326 INT16 - Power Factor
Harmonics order by order V1 0 to 50 401536 UINT16 - Harmonics
V1 V 401280 UINT32 - General
Quadrant PF1 401327 UINT16 - Power Factor
PF2 401328 INT16 - Power Factor
Quadrant PF2 401329 UINT16 - Power Factor
PF3 401330 INT16 - Power Factor
Quadrant PF3 401331 UINT16 - Power Factor

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews