Skip to content

Elmeasure MPS8000,MPU5110 Modbus register preview

Public preview for Elmeasure MPS8000,MPU5110 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: elmeasure/mps8000-mpu5110
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Voltage R harmonics 400184 FLOAT32 V Voltage
Current average 400148 FLOAT32 A Current
Frequency 400156 FLOAT32 Hz Frequency
Pf avg inst 400116 FLOAT32 - Power Factor
Watts total 400100 FLOAT32 - General
Pf R phase 400118 FLOAT32 - Power Factor
Pf Y phase 400120 FLOAT32 - Power Factor
Pf B phase 400122 FLOAT32 - Power Factor
Current R phase 400150 FLOAT32 - Current
Current Y phase 400152 FLOAT32 - Current
Current B phase 400154 FLOAT32 - Current
Pf average received 400174 FLOAT32 - Power Factor

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews