Elmeasure Energy Process Monitor Modbus register preview¶
Public preview for Elmeasure Energy Process Monitor (Power Meter). This sample is not a complete map or evidence of hardware testing.
Preview details¶
- Catalog ID:
elmeasure/energy-process-monitor - Map version: 1.0
- Verification: not-reviewed
- Protocols: RTU, TCP
- Public preview: 12 registers. Complete in-app availability is not established by this preview.
Register table (sample)¶
| Signal | Display address | Data type | Units | Category |
|---|---|---|---|---|
| Current total | 400148 | FLOAT32 | - | Current |
| Frequency | 400156 | FLOAT32 | Hz | Frequency |
| Pf ave instantaneous | 400116 | FLOAT32 | - | Power Factor |
| Status onoff di 1 | 400214 | UINT32 | - | Status |
| Watts total | 400100 | FLOAT32 | - | General |
| Pf R phase | 400118 | FLOAT32 | - | Power Factor |
| Pf Y phase | 400120 | FLOAT32 | - | Power Factor |
| Pf B phase | 400122 | FLOAT32 | - | Power Factor |
| Current R phase | 400150 | FLOAT32 | - | Current |
| Current Y phase | 400152 | FLOAT32 | - | Current |
| Current B phase | 400154 | FLOAT32 | - | Current |
| Amps max of last minute | 400170 | FLOAT32 | A | Current |
Addressing and setup¶
Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.
Use with Modbus Monitor XPF¶
Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.
Get Modbus Monitor XPF · Request a map or correction · Browse all previews