Skip to content

Cewe Prometer 100 Modbus register preview

Public preview for Cewe Prometer 100 (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: cewe/prometer-100
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Meter primary voltage Volt 301012 FLOAT32 V Voltage
Meter primary current Amp 301016 FLOAT32 - Current
All phase power factor NA 301120 FLOAT32 PF Power
Active import Fundamental harmonics kWh 301400 FLOAT32 kWh Energy
Frequency hz Hz 301122 FLOAT32 Hz Frequency
Meter type 0 - HT3 1 - HT4 2 - LT 3CT 4W NA 301022 FLOAT32 - General
Meter secondary voltage Volt 301014 FLOAT32 V Voltage
Meter secondary current Amp 301018 FLOAT32 - Current
Meter maximum current Amp 301020 FLOAT32 - Current
Phase voltage L1 Volt 301100 FLOAT32 V Voltage
Phase voltage L2 Volt 301102 FLOAT32 V Voltage
Phase voltage L3 Volt 301104 FLOAT32 V Voltage

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews