Skip to content

Baker Hughes SureSens SDA Modbus register preview

Public preview for Baker Hughes SureSens SDA (Power Meter). This sample is not a complete map or evidence of hardware testing.

Preview details

  • Catalog ID: baker-hughes/suresens-sda
  • Map version: 1.0
  • Verification: not-reviewed
  • Protocols: RTU, TCP
  • Public preview: 12 registers. Complete in-app availability is not established by this preview.

JSON preview · Data terms

Register table (sample)

Signal Display address Data type Units Category
Gauge 1 status Gauge Status 0 good 300021 FLOAT32 - Status
Gauge 1 temperature Degrees F 300019 FLOAT32 degC Temperature
Gauge 1 pressure Psia 300017 FLOAT32 - General
Gauge 2 temperature Degrees F 300025 FLOAT32 degC Temperature
Gauge 2 status Gauge Status 0 good 300027 FLOAT32 - Status
Gauge 3 temperature Degrees F 300031 FLOAT32 degC Temperature
Gauge 3 status Gauge Status 0 good 300033 FLOAT32 - Status
Gauge 4 temperature Degrees F 300037 FLOAT32 degC Temperature
Gauge 4 status Gauge Status 0 good 300039 FLOAT32 - Status
Gauge 5 temperature Degrees F 300043 FLOAT32 degC Temperature
Gauge 5 status Gauge Status 0 good 300045 FLOAT32 - Status
Gauge 6 temperature Degrees F 300049 FLOAT32 degC Temperature

Addressing and setup

Addresses and values above are copied from the public JSON preview. Confirm the exact model, firmware, register function, address base, word order, scaling and units against the manufacturer manual before polling. No manufacturer manual revision or hardware validation is established by this page.

Use with Modbus Monitor XPF

Check the device-map catalog in your installed XPF version for current map availability and licensing. The software download link does not open this map.

Get Modbus Monitor XPF · Request a map or correction · Browse all previews